FlexiLip™ 프로파일 제품은
침수된 오일 및 심한 스플래시(Splash) 씰링 용도로 적합 합니다.
최대 25 m/sec(5000 fpm) 속도와 최대 150 psi 압력 환경에 적합 합니다.
상표: Parker Hannifin
파카 하니핀
파커 하니핀
품명: Flexi Lip Seal
Oil Seal
Shaft Seal
플렉시 립 씰
오일 씰
축(샤프트) 씰
형상: LDN-N
유형: Dual Lip
이중 립
Double Lip
OD 중앙 O-Ring 장착
재료: 탄소 섬유 충전 PTFE
Carbon Fiber Filled PTFE
립 재료 선택
0127 미네랄 충전(Meral Filled) PTFE - 회전 응용 분야에 대한 FDA 규정 준수
0204 유리 섬유 및 MoS2 충전 PTFE
Fiberglass and MoS2 Filled PTFE)
0301 흑연 충전 PTFE
Graphite Filled PTFE
0502 탄소 섬유 충전 PTFE
Carbon Fiber Filled PTFE
0615 파카 하니핀 社 독점적인 저마모 PTFE
Proprietary Low Wear PTFE
| Materials Code |
Material | Color | Typicla Applications & Description |
Temperature Range | Tensile Strength in psi at Break (bar) | Elongation in (%) | Hardness Shore D |
FDA / NSF Compliant |
| 0100 | Virgin PTFE | White | Excellent for cryogenic Applications. Good for Gases |
-255 ~ +230℃ -425 ~+450℉ |
4575 psi 315 bar |
400 | 60 | Yes |
| 0102 | Modified PTFE | Turquoise | Lower Creep, Reduced Permeability and Good Wear Resistance. | -195 ~+230℃ -320 ~+450℉ |
4600 psi 317 bar |
390 | 60 | Yes |
| 0120 | Mineral Filled PTFE | White | Excellent Low Abrasion to Soft Surfaces & Improved Upper Temperature Performance. | -155 ~+290℃ -250 ~+550℉ |
4070 psi 281 bar |
270 | 65 | Yes |
| 0127 | Mineral Filled PTFE - FDA Compliant | White | FDA Compliant Materials for Sanitary Food & Pharmaceutical Processing. | -155 ~+290℃ -250 ~+550℉ |
2800 psi 193 bar |
250 | 66 | Yes |
| 0128 | Mineral Filled PTFE - Antimicrobial | White | FDA Material with and Antimicrobial Agent Added to Prevent Bacterial Growth | -155 ~+290℃ -250 ~+550℉ |
2800 psi 193 bar |
250 | 66 | Yes |
| 0203 | Fiberglass Filled PTFE | Gold | Excellent Compressive Strength and Good Wear Resistance. | -130 ~+300℃ -200 ~+575℉ |
3480 psi 240 bar |
190 | 67 | No |
| 0204 | Fiberglass & Moly Filled PTFE | Gray | Excellent for Extreme Conditions Such as High Pressure & Temperature and for Longer Wear Life on Hardened Dynamic Surfaces. | -130 ~+300℃ -200 ~+575℉ |
3100 psi 214 bar |
245 | 62 | No |
| 0301 | Graphite Filled PTFE | Black | Excellent for Corrosive Service. Low Abrasion to Soft Shafts. Good in Unlubricated Service. |
-155 ~+290℃ -250 ~+550℉ |
3200 psi 221 bar |
260 | 60 | No |
| 0307 | Carbon Graphite Filled PTFE |
Black | Excellent Wear Resistance and Reduced Creep. | -155 ~+300℃ -250 ~+575℉ |
2250 psi 155 bar |
100 | 64 | No |
| 0405 | Stainless Steel Filled PTFE |
Gray | Excellent Extrusion Resistance at High Temperatures and at High Temperatue and Pressure. | -155 ~+315℃ -250 ~+600℉ |
2200 psi 152 bar |
190 | 72 | No |
| 0502 | Carbon Fiber Filled PTFE |
Brown | Good for Strong Alkali and Hydrofluoric Acid. Good in Water Service. |
-130 ~+290℃ -200 ~+550℉ |
3200 psi 221 bar |
312 | 60 | No |
| 0601 | Aromatic Polyester Filled PTFE |
Tan | Excellent High Temperature Capabilities & Excellent Wear Resistance. | -130 ~+290℃ -200 ~+550℉ |
2500 psi 315 bar |
200 | 61 | No |
| 0615 | Proprietary Low Wear PTFE |
Purple | Excellent Low Wearing Material. Kind to Soft Mating Surfaces in the Rb Range. |
-130 ~+290℃ -200 ~+550℉ |
3470 psi 239 bar |
200 | 63 | No |
| 0901 | UHMW Polyethylene |
Translucent | High Wearing Plastic for Use in Abrasive Medias. Excellent in Water Based Medias, but Restricted Chemical & Heat Resistance. |
-195 ~+95℃ -320 ~+200℉ |
6000 psi 414 bar |
325 | 67 | Yes |
| 0913 | Hytrel® Unlubricated Thermoplastic Elastomer |
Black | Excellent in Gases and Most Hydraulic Fluids. Good Abrasion Resistance with High Wear Properties. |
-60 ~+135℃ -80 ~+275℉ |
5800 psi 400 bar |
500 | 55 | Yes |
응용 분야: 모터, 기어 박스, 펌프, 극저온 장치 등 다양한 응용 분야에서 사용 가능 합니다.
최대 작동 압력: 10.3 bar
150 psi
규격: 샤프트 1.188 x 보어 1.983 x 씰 폭 0.250 인치
Shaft Dia. 1.188 x Bore Dia. 1.983 x Seal Wid. 0.250 inch
샤프트 직경 30.175 x 보어 직경 50.368 x 폭 6.35 mm
제작 가능한 크기 범위:
샤프트 직경 기준 19.00 ~ 305 mm단면 기준 최소 6.00 mm
넓이 기준 최소: 8.00 mm
리드 타임: 약 6~12 주
